Flagpoles with halyard
Flagpoles with a halyard are a classic and versatile solution for permanent flags. The flag is raised using a halyard and can easily be lowered for changing or maintaining the flag.

Flagpoles with rotating boom
With a rotating boom, the flag remains clearly visible even in light winds. The boom keeps the flag fully extended and allows it to rotate freely around the pole.
A counterweight is attached to the bottom of the flag, keeping the lower right corner free in the wind.
For a longer lifespan of the flag and pole, we recommend replacing the counterweight with a Flexi lower boom. This keeps the flag slightly tighter, prevents the corner from flapping in the wind and therefore reduces wear. The flag stays looking good for longer while still retaining the real waving effect.

Flagpoles with hoisting boom or pulley system
A flagpole with a hoisting boom allows the flag to be easily raised and lowered from ground level. Changing flags and carrying out maintenance therefore becomes much easier and safer.
Another advantage is protection against theft and noise. The counterweight of the hoisting system is located inside the pole, making it difficult to access from the ground. In addition, the moving parts are enclosed, ensuring quiet operation.
This system is usually fitted with a flexible lower boom, which helps to extend the service life of both the flag and the pole. It keeps the flag slightly tighter, prevents its corner from flapping in the wind and thereby reduces wear. This helps the flag stay looking good for longer while still retaining that authentic fluttering feel.
Be sure to watch the demonstration video at the very bottom of this page as well.

Special flagpoles
For specific locations or applications, customised flagpole solutions are also possible. The height and design are adapted to the location, the flag and the desired appearance. Together, we determine which solution best suits the application.

Ground sleeves
Ground sleeves provide a sturdy and discreet mounting solution for flagpoles and are suitable for permanent installation. The sleeve is installed in the ground and extends slightly above ground level. The flagpole is then fitted over the ground sleeve.

Tilting bases - base plates
A tilting base allows the pole to be easily lowered for maintenance or changing the flag. A tilting base can also be mounted on a movable concrete block, making the pole flexible to use.
Base plates provide a practical solution when a pole cannot be installed directly into the ground. The base plate is anchored to a suitable surface and provides a secure mounting for the pole.

Ground sleeve with pole length loss.
A ground sleeve with pole length loss is a practical solution when a flagpole needs to be temporarily removed to create free passage. When the pole is removed, nothing protrudes above ground level. The ground sleeve can also be closed with a cover plate.

Existing flagpoles
We can also supply flags, mounting systems and parts for existing flagpoles. We assess the existing situation and look for a suitable solution, even when the pole was not installed by us.
Thanks to our wide range, we have parts available for different types and versions of flagpoles.

Repairs & parts
Thanks to our own production and stock of parts, we can repair, modify and maintain existing flagpoles. Many parts are available separately, so the entire pole does not always need to be replaced. Where necessary, we can also manufacture parts ourselves.

More information about maintenance & service

Straight wall brackets
Straight wall brackets are suitable for mounting flags against façades and walls where vertical installation is possible.

Angled wall brackets
Angled wall brackets make it possible to mount a flagpole at an angle against a façade. This allows the flag to be displayed in a visible and representative way.

Tensioning systems
For flags and banners tensioned against a façade or structure, we offer various mounting and tensioning systems.

Banner mounting
Various mounting options are available for banners and façade flags. We provide a suitable solution based on the size, location and desired appearance.

A surf flagpole is curved at the top, allowing the flag to follow a flowing shape.

A surfbeam, on the other hand, has a straight top section, allowing the upper edge of the flag to be tensioned straight.

Both versions are suitable for mobile, temporary and permanent applications, such as events, promotional activities, company sites and shops. Our surf flagpoles and surfbeams are manufactured in-house, allowing customised dimensions and versions to be produced.

All parts are also available separately, making it easy to replace or renew individual components without replacing the entire pole.